Left Chest Logo Size Guide for Embroidery

Getting left chest logo size right is the difference between a professional uniform and an amateur one. Too small and nobody can read it; too big and it looks like a costume. Use this guide as your starting point.

Standard Left Chest Sizes by Garment

Wide Logos vs Tall Logos

Size by the logo's longest side. A wide horizontal logo can go up to about 4 inches wide but will be short; a square or round badge usually looks right at about 3–3.5 inches; a tall vertical logo should stay under about 3.5 inches high.

Placement

The usual position is centered over the left chest, with the top of the design about 7–9 inches down from the shoulder seam (where it meets the collar) and about 4 inches from the center of the garment. On a polo, align the center of the logo roughly with the second button.

Minimum Text Size

Embroidered letters need space. As a rule, keep text at least about 0.25 inch (6 mm) high for capitals; small taglines below this often blur. A good digitizer will widen thin letters or suggest dropping a tagline at left chest size — see our left chest logo digitizing service.

Fabric Changes the Size You Need

• Piqué polos have texture that swallows tiny details — keep it bold.
• Fleece needs slightly bigger text and a topping to stay readable.
• Thin dress shirts pucker under heavy designs — go smaller and lighter.

Same Logo, Other Placements

Need the logo on a cap or a jacket back as well? Order separate files: cap digitizing and jacket back digitizing. Enlarging a left chest file by more than about 10–15% distorts density.

Get Your Logo Sized and Digitized

Tell us the garment and we'll size it correctly. Files from $10, first sample free — get a quote.